ZStack Cloud Documentation
All
All
ZStack Cloud 4.4.0>Tutorials>Private Cloud>Quick Installation and Usage Tutorial>Environment Preparations
Get PDF

Prepare Software Packages

Before you install ZStack Cloud, prepare the following software packages:
  • ZStack Cloud custom ISO:
    • C76: ZStack-Cloud-x86_64-DVD-4.4.0-c76.iso
    • Download address: Click here
  • ZStack Cloud installation package:
    • Software: ZStack-Cloud-installer-4.4.0.bin
    • Download address: Click here
Note: After you download the software packages, check the MD5 hash by using a MD5 checker to verify software integrity.

Hardware Requirements

The following table takes a single server deployment (All-in-One) as an example to describe the configuration requirements over the server and other hardware devices for the installation and deployment of ZStack Cloud.
Device Configuration Requirements
Server
  • CPU: support for 64 bit, Intel VT or AMD V virtualization hardware extensions, and with no lower than 4 cores
  • Memory: no lower than 8 GB for basic demonstration environments and no lower than 64 GB for production environments
  • At least 1 SATA hard disk with no lower than 1 TB of storage capacity
  • At least a one-gigabit NIC
Network Switch
  • At least a one-gigabit switch, ten-gigabit switch recommended
  • Several Category 5 jumpers

Burn Image to U Disk

This topic describes how to use Rufus to burn the prepared ISO image file to a U disk.
  1. Use Rufus to open the ISO image file.

    Open Rufus, select Disk or ISO image (Please select) from the Boot selection drop-down list, and click the Select button to open the downloaded ISO image file.

    Figure 1. Use Rufus to Open ISO Image File


  2. Write the Image.

    Use the default setting and click In Rufus, choose Start.

    Figure 2. Write Disk Image on Rufus


  3. After you click Start, you will be reminded of the risk that the disk data will be formatted. Click OK to burn the image file.
    Note: Before you burn the image file, make sure that you backup the data on the U disk.
    Figure 3. Confirm to Write ISO Image on Rufus


  4. Then the U disk is used as the startup disk. This disk supports the Legacy and UEFI boot modes.
Download

Already filled the basic info? Click here.

Enter at least 2 characters.
Invalid mobile number.
Enter at least 4 characters.
Invalid email address.
Wrong code. Try again. Send Code Resend Code (60s)

An email with a verification code will be sent to you. Make sure the address you provided is valid and correct.

Download

Not filled the basic info yet? Click here.

Invalid email address or mobile number.

Email Us

contact@zstack.io
ZStack certification training consulting
Enter at least 2 characters.
Invalid mobile number.
Enter at least 4 characters.
Invalid email address.
Wrong code. Try again. Send Code Resend Code (60s)

Email Us

contact@zstack.io

The download link is sent to your email address.

If you don't see it, check your spam folder, subscription folder, or AD folder. After receiving the email, click the URL to download the documentation.

The download link is sent to your email address.

If you don't see it, check your spam folder, subscription folder, or AD folder.
Or click on the URL below. (For Internet Explorer, right-click the URL and save it.)

Thank you for using ZStack products and services.

Submit successfully.

We'll connect soon.

Thank you for choosing ZStack products and services.

English

© 2021, Shanghai Yunzhou Information and Technology Ltd. All Rights Reserved.

Back to Top